How often should I lube my chain?
Lube your chain when the cracks and crevices are vacant of lube. Ride 5 miles a week in good weather and you’re good for months. Average 30 miles a week in good weather and you should be lubing about every 2 weeks. Average 50 miles a ride in good weather, and it’s every ride.
When should you clean and lube a motorcycle chain?
A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.
How often does a motorcycle chain need adjusting?
How do I know if my motorcycle chain needs Lube?
Check the slack
A little bit of play is OK, but if you can get a screwdriver in between the chain and sprocket, it’s time for a new chain. If the chain passes that test move on to the tension. Midway between the rear wheel sprocket and the front (gearbox) sprocket, move the chain up and down.
Is it OK to use wd40 on bike chain?
As a solvent, WD-40 will strip away any existing lubricant, leaving your chain, and drivetrain dryer than before application. This means that using WD-40 as a chain lubricant is worse than using no lube at all. … REI does not recommend using WD-40 on your bike (it is a cleaner but not a lubricant).
Should I use wet or dry chain lube?
Wet lube goes on wet and stays wet, while dry lube goes on wet and leaves a clean, dry, waxy residue. Dry lubes don’t last as long and are best used in dry conditions. Wet lubes stay on significantly longer, even while riding in inclement conditions.
What happens if you don’t lube your motorcycle chain?
If the chain is not lubricated it will wear prematurely. … This has the effect of changing the distance between the rollers.As the chain grows it will no longer match the pitch of the drive sprockets, the sprockets will wear out prematurely. If you then change the chain it will be worn by the old sprockets.
Can you over lube a motorcycle chain?
Over-lubing can also be detrimental, as excess lube attracts dirt, forming a gritty paste which grinds down chain components and other drivetrain bits. Appearance, time, or distance are not as reliable as sound (grinding, creaking, squeaking, squealing) as an indicator for when a chain needs to be lubed.
What is the best lubricant for motorcycle chain?
- ProHonda Chain Lube (& Cleaner) …
- Maxima Chain Wax – $7.50 – 11.50. …
- Bel-Ray Super Clean Chain Lube – $9 -$15. …
- Motorex Road Chain Lube – $19. …
- Motul C2 Chain Lube Road – $12. …
- DuPont Teflon Chain-Saver Dry Self-Cleaning Lubricant – $4. …
- PJ1 Blue Label Chain Lube – $9 – $14.
How loose should your motorcycle chain be?
On average, however, most street motorcycles will need a chain tension of about 20 – 30 mm, or about a half inch to an inch in slack. This means that the chain should be able to move about a half inch to an inch up and about a half inch to an inch down. It’s easiest to measure this using a measuring tape.
How long does a chain last on a motorcycle?
But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can will last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles.
Is Chain Wax better than lube?
Also, keep in mind that you tend to use more wax than lube in a single application. If you want to use your motorcycle immediately you lubricate the chain, then you’ll be better off using chain lube. It does the job faster and reaches all the areas of your chain, making things move smoother faster than the wax.
Can I use engine oil as chain lube?
Using engine oil as a chain lubricant might serve you the purpose. … Engine oil could get greasy at lower temperature or might even solidify. Improper lubrication would lead to chain wear, jerky transmission and added friction. Engine oil costs more than the chain lube.