FAQ

How to read motorcycle tires

What motorcycle tire numbers mean?

The first number (180) is the width of the tire in millimeters. The second number (70) is the aspect ratio, which is the height of the sidewall. The height is 70% of the width or 126mm high. The third number (16) is the rim size. In this case, the rim size is 16 Inches in diameter.

What is the H rating on a motorcycle tire?

130 mph

What do the numbers mean on a dirt bike tire?

These numbers give the measurements of three dimensions that every tire has: -The first number is the width of the tire from sidewall to sidewall in millimeters. -The second number is the sidewall height (also known as the aspect ratio) that’s represented as a percentage of the tire width (the first number).

Can I put a bigger tire on my motorcycle?

As long as the tires fit the bike (ie, don’t start rubbing against the frame/swingarm/etc) you can put larger tires on, but it won’t improve the handling. It will probably make it worse. The wider and heavier the tires, the more inertia they’ll have and the bigger contact patch will make the bike harder to turn.

Are wider motorcycle tires better?

It’s always a balance of grip, handling, and wear. So, smaller, less powerful bikes can get away with smaller, narrower tires, while bigger, more powerful bikes require larger, wider tires so that they offer adequate traction and wear, but not so wide that it ruins the handling.

How do I know my motorcycle wheel size?

How to Measure a Motorcycle Rim

  1. Remove the tire from the rim.
  2. Lay the rim on a flat surface.
  3. Measure the diameter of the rim. Do this by measuring the distance between the widest point of the rim. Measure from the bed where the tire will sit. …
  4. Measure the width of the rim. Do this by measuring the distance from one side of the tire bed to the other.
You might be interested:  How to spray paint a motorcycle gas tank

What does the B stand for on motorcycle tires?

bias-belted

What does Zr mean on a motorcycle tire?

maximum speed capability

Should I replace both motorcycle tires at the same time?

Should you replace both motorcycle tires at the same time or not? The short answer is NO. When the front presents enough tread life, you don’t need to replace it with the rear. However, if there is physical damage or the tire is over five years from the manufacture date, you should replace them both.

Can I put two different brand tires on my motorcycle?

Tires are the most important part of a motorcycle. It is not a bad idea to buy tires of different brands unless one of them is cheap or doesn’t have the quality of the other. Tires with different type of tread pattern may cause some difference in your bikes stability (Read this), just an opinion.

What is an A spec motorcycle tire?

A-Spec rear tire denotes a reinforced carcass for heavy-duty sport-touring models. Tread contact area designed to improve mileage. Innovative profile and new structure which decrease the stress the compounds are subjected to.

What TYRE size is 90 90?

90 is the width of tyre in millimeters from one sidewall to the other; 100 is aspect ratio of the tyre i.e. the ratio of the cross-section to its width; 10 is the diameter of the wheel in inches; 53 is the tyres load index, that is, the tyres maximum carrying capacity.

What dirt bike tire is the best?

Our final section looks at the top four soft compound tires available for dirt bike riders.

Top 4 soft Compound motocross tires

  • Michelin Starcross 5 Sand dirt bike tire. …
  • Bridgestone X20 soft compound dirt bike tire. …
  • Pirelli MX32 Mid Soft Dirt Bike tire.

Leave a Reply

Your email address will not be published. Required fields are marked *