FAQ

How to remove blue from motorcycle exhaust pipes

Why do motorcycle exhaust pipes turn blue?

Motorcycle exhaust pipes turn blue as a result of extreme heat passing through them. This is usually caused by the motorcycle running lean, meaning there is too much air and too little gas being mixed together which causes a higher temperature to pass through the exhaust pipes.

Why do motorcycle exhaust pipes turn yellow?

Most exhausts will turn a color, especially the lesser expensive ones that don’t have a quality chrome process. But heat certainly has a lot to do with the discoloration and the hotter those pipes get, the darker the color, usually. Just be glad they aren’t black or blue, indicating a hot or very lean condition.25 мая 2012 г.

Is my motorcycle running rich or lean?

A motorcycle running well will have a little bit of wear on the end of the spark plug. A motorcycle running lean will have little or no wear on the spark plug because it’s not igniting near as much fuel as it should be.

How do I fix a hole in my motorcycle exhaust?

You also can take a drill bit and drillthe hole out so its perfectly round and has clean edges, then take a plug or short bolt and put jb weld around it and pop/screw it in. Then for a a little extra reassurance put some more jb around the seam and faded into the bolt and exhaust to get an extra bite.

How do you clean titanium motorcycle exhaust?

1. Clean the titanium exhaust components with a multi-purpose spray lubricant (WD-40 or equivalent ), carbon fiber exhaust components with soft and dry cloth and stainless steel components with soft cloth sprayed with contact cleaner, then wipe with soft and dry cloth.

You might be interested:  How do you take a motorcycle driving test

How do I stop my motorcycle exhaust from rusting?

To prevent your motorcycle exhaust from rusting, the first thing you should start doing is routine cleaning and washing. It’s also helpful to occasionally use a degreaser, paint or powder coat the exhaust, or replace it with pipes that are corrosion-resistant.

How do you clean chrome motorcycle exhaust?

First, try oven cleaner. It works on baked-on grime in your oven, so it will also work on baked-on grime your pipes. The pipes need to be warm to hot, so leave it about 15 minutes after a ride. Spray on, leave about five minutes and wipe off with a rag, careful not to burn your hand.

How do you get melted boot off exhaust?

cold and get something and buff it off or warm and buff it off. do you want to deal with hard or gooey black stuff it get off. I personally with do it cold with a good knife or razer scraper. then polish the rest off.

Can you use Goo Gone on Chrome?

Re: Goo Gone on chrome? It won’t harm the chrome at all. actually it helps clean it pretty well. Just windex it all of when you’re done though – or it will stay greasy.

How hot are motorcycle exhaust pipes?

The inside of an exhaust gets far hotter than the outside. The double skin is there to reduce the temperature of the outside, to look more impressive (bigger pipes, bigger engine). Combustion exhaust gas temperatures can be in excess of 1000 degrees C, but are typically about 800 degrees C.

You might be interested:  How to bypass neutral safety switch on a motorcycle

Why are my motorcycle pipes turning gold?

Turning “Gold” indicates a slightly rich fuel mix. “Blue” indicates lean. Running a little rich helps the engine run cooler in hot weather. Get some good metal polish and they should clean up.

Leave a Reply

Your email address will not be published. Required fields are marked *