FAQ

What do the numbers mean on motorcycle tires

What does the B mean on motorcycle tires?

bias-belted

What do the numbers and letters mean on tire size?

B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. … It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width. In other words, it’s sidewall height divided by tire width.

Should I replace both motorcycle tires at the same time?

Should you replace both motorcycle tires at the same time or not? The short answer is NO. When the front presents enough tread life, you don’t need to replace it with the rear. However, if there is physical damage or the tire is over five years from the manufacture date, you should replace them both.

Can I put two different brand tires on my motorcycle?

Tires are the most important part of a motorcycle. It is not a bad idea to buy tires of different brands unless one of them is cheap or doesn’t have the quality of the other. Tires with different type of tread pattern may cause some difference in your bikes stability (Read this), just an opinion.

Are wider motorcycle tires better?

It’s always a balance of grip, handling, and wear. So, smaller, less powerful bikes can get away with smaller, narrower tires, while bigger, more powerful bikes require larger, wider tires so that they offer adequate traction and wear, but not so wide that it ruins the handling.

You might be interested:  How to clean textile motorcycle jacket

Can I put a bigger tire on my motorcycle?

As long as the tires fit the bike (ie, don’t start rubbing against the frame/swingarm/etc) you can put larger tires on, but it won’t improve the handling. It will probably make it worse. The wider and heavier the tires, the more inertia they’ll have and the bigger contact patch will make the bike harder to turn.

How do I know my motorcycle wheel size?

How to Measure a Motorcycle Rim

  1. Remove the tire from the rim.
  2. Lay the rim on a flat surface.
  3. Measure the diameter of the rim. Do this by measuring the distance between the widest point of the rim. Measure from the bed where the tire will sit. …
  4. Measure the width of the rim. Do this by measuring the distance from one side of the tire bed to the other.

Can I use 235 tires instead of 225?

Yes…that size will work 100% perfectly, as it is the exact same diameter as the 225/75-16. 235/70-16 is actually a shorter tire.

Can you put different width tires on same rim?

To keep the suspension and speedometer functioning correctly, both the stock diameter and width of the wheels and tires needs to be maintained. As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim.

Can I use 225 tires instead of 215?

Probably not. All tires have a rim width mounting range of generally one to two inches. For example, a 225/50R18 sized tire can mount on a 18″ diameter rim with a width of anywhere from 6-8″. But your issue is not only will it fit but whether it is safe to use on your specific year, make and model of vehicle.

You might be interested:  What license is needed to drive a motorcycle

Which tire wears faster on a motorcycle?

In case of a two-wheeler the rear wheel which obviously is the power wheel wears down faster. When we are accelerating the pressure on rear wheel is more as compared to the front wheel. This is also one of the reasons why manufacturers throw in a bigger wheel at the rear as compared to the one in front.

What is the average life of motorcycle tires?

five years

Leave a Reply

Your email address will not be published. Required fields are marked *