Interesting about motorcycles

How to remove bluing from motorcycle exhaust pipes

What causes bluing on motorcycle exhaust pipes?

Motorcycle exhaust pipes turn blue as a result of extreme heat passing through them. This is usually caused by the motorcycle running lean, meaning there is too much air and too little gas being mixed together which causes a higher temperature to pass through the exhaust pipes.

How do I stop my exhaust from bluing?

Ways to stop or cover up bluing

  1. Make sure your engine is tuned. …
  2. Air leaks can cause an excessive heat buildup. …
  3. New motorcycle engines go through a break-in period. …
  4. Painting the inside of the exhaust pipes with a ceramic based liquid like DYNO-KOTE™ or Blue Shield can insulate the pipes from intense heat and bluing.

Why do motorcycle exhaust pipes turn yellow?

Most exhausts will turn a color, especially the lesser expensive ones that don’t have a quality chrome process. But heat certainly has a lot to do with the discoloration and the hotter those pipes get, the darker the color, usually. Just be glad they aren’t black or blue, indicating a hot or very lean condition.25 мая 2012 г.

How hot do exhaust pipes get motorcycle?

Combustion exhaust gas temperatures can be in excess of 1000 degrees C, but are typically about 800 degrees C. Heat is dissipated as it goes back through the exhaust pipes, but not by all that much. The cans will usually be hot enough to burn you too, but should be at a lower temperature than the rest of it.

Does wrapping exhaust do anything?

Keeps exhaust gases heated up so they flow more efficiently

You might be interested:  What does a regulator do on a motorcycle

Heat the syrup up, and it runs quickly, dissipating over a larger area (a full plate of pancakes) at a faster rate. By spreading the metal’s heat, insulating wrap keeps exhaust flowing faster by decreasing its density.

What does wrapping your motorcycle exhaust do?

It works to decrease the engine temperature on your bike.

Using exhaust wrap will help to keep the higher temperatures in the pipe instead of emanating throughout the entire system. That means you’re giving an assist to the system that’s responsible for pushing out the heat and smoke from the combustion process.

What causes a motorcycle to run lean?

Diagnosing An Engine Running Lean

If you have more than 14.7 parts air, then your motorcycle engine will run lean, meaning the engine is getting more air than it needs and is not getting enough fuel. The excessive air will cause the mixture to burn a lot hotter than normal.

How do you make exhaust pipes shine?

Using a cloth, clean the exhaust tip, then for inside the exhaust, use a hard bristled brush, cleaning as deep in the tail pipe as you are able to. Applying a degreaser will help in breaking up carbon deposits and rust. Using a dry cloth, apply a degreaser to the inside and outside of the exhaust.

Leave a Reply

Your email address will not be published. Required fields are marked *