Useful

How to pinstripe a motorcycle

How do you pinstripe a motorcycle gas tank?

How to Paint Pin Stripes on Motorcycle Gas Tanks

  1. Cut painter’s tape into narrow strips, or buy it pre-cut. …
  2. Begin laying the tape strips over your gas tank, making sure they form evenly spaced, parallel lines. …
  3. Paint over the entire gas tank with the color of your choice.
  4. Allow the tank to dry.
  5. Peel off the painter’s tape.

How do I start pinstriping?

Step By Step: How To Start Pinstriping

  1. Step 1: Get paint thinner for cleaning brushes. …
  2. Step 2: Pick out brushes. …
  3. Step 3: Plan To Thin. …
  4. Step 4: Use clean surface. …
  5. Step 5: Rinse and dip brush into thinner. …
  6. Step 6: Wipe surface clean to remove grease and dirt. …
  7. Step 7: Remove extra film with glass cleaner. …
  8. Step 8: Position brush tip and start pulling back.

Can you clear coat over pinstripe tape?

Once the first coat of clear has dried you can apply your pinstripe then paint the surface with a half coat or tack coat and allow it to dry. This will seal the edge of the pinstripe tape. … When pinstripes are applied to vehicles they are normally applied to the final surface of the clear or paint.

How much does motorcycle pinstriping cost?

I usually ask the question, do you want it simple, medium or fancy?,A simple job, few designs or lines here and there would cost $50-$100. A medium job would run from $100-$175 and a more detailed job could run from $200 and up depending upon how elaborate you want me to go.

You might be interested:  How to get a title for a motorcycle without title in pa

What kind of paint do you use on a motorcycle?

The best paint to use on a motorcycle gas tank is Dupli-Color aerosol spray paint. It has proven to give the best results as well as doesn’t show spray lines, it’s easy to use, and costs much less than an HVLP paint sprayer and accommodating equipment.

How long does pinstriping last?

When properly cared for, your lettering or pinstriping should last for many years. We’ve personally experienced it lasting 10 years or more. Do not wax, buff or power-wash for 30 days. After 3 days, you may wash gently by hand.

Is pinstriping still popular?

It’s just not as common anymore. You generally don’t see it on newer vehicles, but muscle cars, hot rods, and even newer high performance cars still sport the two stripe look. Intricate pin striping is still a sought-after look, but not often on every day drivers.

Should you clear coat over decals?

A clear coat, or several, can add pristine uniform gloss. But always test a sample of your clear paint with a sample decal first. Many clear-coat paints will remove or tarnish and smear printed decals! … I’ve seen many with custom motorcycles attempt a clear coat over top of the vinyl decals, and with excellent success.

How do you use pinstriping stencil tape?

Hand paint pinstripes on vehicles, motorcycles, signs, etc. using our Pintstriping Stencils. Just apply the stencil, remove clear carrier, and paint in between the lines. The peel off the remaining stencil.

Leave a Reply

Your email address will not be published. Required fields are marked *